DS1307N

Les images sont à titre de référence seulement

DS1307N

IC RTC CLK/CALENDAR I2C 8-DIP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Clock/Calendar
Features Alarm, Leap Year
TimeFormat HH:MM:SS (12/24 hr)
DateFormat YY-MM-DD-dd
Interface I²C, 2-Wire Serial
Voltage-Supply 1.3V ~ 5.5V
Current-Timekeeping(Max) 14µA ~ 30µA @ 3V ~ 5V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SMD, Flat Lead
MemorySize 1B
Voltage-SupplyBattery 1.6V ~ 3.6V
Series Automotive, AEC-Q200

Vue d'ensemble

Description

DS1307N is a low‑power I2C real‑time clock/calendar from Dallas/Maxim. It keeps time (seconds, minutes, hours, day, date, month, year with leap‑year handling) and offers 56 bytes of battery‑backed RAM for data logging.
Key features
- External 32.768 kHz crystal for time base
- 1 Hz square‑wave output (SQW/OUT) or configurable
- I2C interface (SDA, SCL)
- Battery backup with trickle‑charge circuit to maintain time when VCC is off
- 8‑pin package (DIP/SOIC): VCC, GND, VBAT, SDA, SCL, X1, X2, SQW/OUT
How it works
- Read/write time data over I2C; registers use BCD format
- Clock runs from VCC; when VCC fails, VBAT powers the RTC and SRAM
- External crystal required for accurate timekeeping
Applications
- Clocks, data loggers, time‑stamping, embedded systems needing continuity across power cycles
Notes
- DS1307N variants exist; verify pinout and features in the datasheet for your package. Overall, a simple, inexpensive RTC for basic timekeeping.

Features

DS1307N features (concise):
- I2C two-wire serial interface (address 0x68) for communication with microcontrollers
- Real-time clock with 32.768 kHz crystal input; timekeeping registers (seconds, minutes, hours, day, date, month, year) in BCD
- Battery-backed operation with VBAT pin and automatic switchover when VCC is removed
- Trickle-charge circuit for charging a rechargeable battery or supercapacitor
- 56 bytes of general-purpose NV RAM (addresses 0x08–0x3F) for user data
- SQW/OUT output with selectable square-wave or interrupt mode
- Control bits to set square-wave frequency: 1 Hz, 4.096 kHz, 8.192 kHz, 32.768 kHz
- Operating range: typically 4.5–5.5 V supply; wide temperature range (-40°C to +85°C)
- Package options: 8-pin DIP/SO (DS1307N variants)
Optional: Real-time clock with leap-year handling; simple, low-power operation.

Package

DS1307N comes in an 8-pin DIP (DIP-8) package. The N suffix denotes the plastic DIP variant.

Pinout

- Pin count: 8 pins (DIP8/SO8 package).
- Function: An I2C real-time clock with battery-backed SRAM. It keeps time/calendar (seconds, minutes, hours, day, date, month, year), supports 32.768 kHz crystal via X1/X2, and VBAT backup. Features include 56 bytes of NV SRAM, write-protect (WP), and an optional 1 Hz square-wave output. Typical pinout (DIP8/SO8): Pin1 X1, Pin2 X2, Pin3 GND, Pin4 SDA, Pin5 SCL, Pin6 WP, Pin7 VBAT, Pin8 VCC.

Manufacturer

- Manufacturer: Dallas Semiconductor Corporation (DS1307N). Dallas Semiconductor is an American semiconductor company that designs and manufactures integrated circuits and related electronics. It became part of Maxim Integrated (and later Analog Devices).

Application

DS1307N is a low‑power I2C real‑time clock with battery backup. Common applications:
- Timekeeping and calendar in microcontrollers and embedded systems
- Data loggers and event time‑stamping in sensors and DAQ
- Alarms, timers and scheduled wake‑up in consumer electronics
- Battery‑backed memory for state and settings during power loss
- Portable/low‑power devices (wearables, handhelds) needing accurate time with minimal circuitry

Equivalent

Common equivalents to the DS1307N (I2C RTC) are:
- DS3231 (Maxim) — higher accuracy TCXO RTC
- PCF8563 / PCF8563A (NXP) — I2C RTC with 32kHz support
- MCP7940N (Microchip) — I2C RTC with battery backup
- RV-3029-C2 (Micro Crystal) — low‑power I2C RTC
Note: exact pinout, memory, and features vary; choose by footprint, accuracy, and required peripherals.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire