DS1302S+

Les images sont à titre de référence seulement

DS1302S+

IC RTC CLK/CALENDAR SER 8-SOIC

  • Fabricant
  • Mfr. Partie #DS1302S+
  • Paquet SOP8
  • Fiche de données
  • En stock5398

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Clock/Calendar
Features Alarm, Leap Year
TimeFormat HH:MM:SS (12/24 hr)
DateFormat YY-MM-DD-dd
Interface I²C, 2-Wire Serial
Voltage-Supply 1.3V ~ 5.5V
Current-Timekeeping(Max) 14µA ~ 30µA @ 3V ~ 5V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SMD, Flat Lead
MemorySize 1B
Voltage-SupplyBattery 1.6V ~ 3.6V
Series Automotive, AEC-Q200

Vue d'ensemble

Description

DS1302S+ is a real-time clock/calendar IC (RTC) from Dallas/Maxim. It combines timekeeping (seconds, minutes, hours, day, date, month, year with leap-year support) with 31 bytes of non-volatile RAM and a trickle-charge circuit, all powered by a main supply (2–5.5 V) plus battery backup (VBAT). It keeps running when power is lost.
Key features:
- 32.768 kHz crystal input for accurate time
- 1 Hz SQW/OUT optional output
- 3-wire serial interface (CE, SCLK, IO) with bidirectional IO line
- 31 bytes NV RAM for user data
- CH bit in seconds register must be cleared to run the clock
- Burst/read/write and convenient bit/BCD data handling
Typical use:
- Connect Vcc and GND, VBAT to a backup source, X1/X2 to the crystal
- Use CE, SCLK, IO to read/write time and RAM
- Read/write times in BCD; avoid stopping the clock
Note: DS1302S+ is essentially the same DS1302 with possible packaging/variant tweaks. Core functionality remains RTC + RAM with trickle-charge.

Features

Here are the main features of DS1302S+ ( RTC/clock IC ):
- Real-time clock with calendar: tracks seconds, minutes, hours, date, month, day of week, year; supports 12/24-hour mode with leap-year handling.
- 32.768 kHz crystal input for accurate timekeeping.
- Battery backup with automatic switchover; built-in trickle-charge circuit to charge a backup cell or supercapacitor from Vcc.
- 31 bytes of battery-backed NV RAM for user data storage.
- 3-wire serial interface (CE, I/O, CLK) with direct register addressing (not I2C or SPI).
- Programmable SQW/OUT square-wave output for timing/synchronization.
- Wide supply voltage: typically 2.0V to 5.5V; low power operation.
- Industrial temperature range support (suitable for room to harsh environments).
- Small 8-pin package variants and straightforward software interface.
Note: DS1302S+ focuses on simple timekeeping with backup, RAM, and a flexible serial interface.

Package

DS1302S+ uses an 8-pin SOP (SOP-8) surface-mount package.

Pinout

- Pin count: 8 pins (DIP-8/SO-8 package).
- Function: Real-time clock/calendar with 32 kHz oscillator and 31 bytes of battery-backed RAM. Uses a 3-wire serial interface (CE, IO, SCLK) to access RTC registers and RAM. Power pins: VCC (main supply), GND, and VBAT (battery backup). Also supports an optional trickle-charge circuit via two pins for external diode/resistor network to charge the backup battery.

Manufacturer

- Manufacturer: Dallas Semiconductor (the DS prefix is their naming). It is now part of Maxim Integrated (and today under Analog Devices).
- Company type: a U.S. semiconductor company that designs and manufactures integrated circuits (e.g., RTCs, memory, analog/mixed-signal ICs).

Application

DS1302S+ is a battery-backed real-time clock with RAM and a trickle charger. Typical applications:
- Time-stamping and scheduling in embedded systems (data loggers, measurement/industrial controllers, POS terminals)
- Home/industrial automation, alarms and timers
- Portable/wearable devices needing offline timekeeping
- Event logging in security systems
- Medical devices requiring accurate time base

Equivalent

Common RTC equivalents/alternatives to DS1302S+ (not pin‑for‑pin drop‑in due to interface differences):
- DS1302/DS1307 (Dallas/Maxim) – 3‑wire interface, battery-backed RAM
- DS3231/DS3232 (Maxim) – I2C RTC, high accuracy
- PCF8563 (NXP) – I2C RTC with RAM
- MCP7940N / MCP7941X / MCP7950X (Microchip) – I2C RTC with RAM
- Seiko S‑35390/S‑35392 (SII) – I2C RTC options
Note: choose by interface and memory needs.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire