CY7C63743-SXC

Les images sont à titre de référence seulement

CY7C63743-SXC

IC MCU 8K USB/PS2 LS 24SOIC

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Cypress Semiconductor Corp
Package Tube
Series enCoRe™
ProductStatus Obsolete
Applications USB Microcontroller
CoreProcessor M8B
ProgramMemoryType OTP (8kB)
ControllerSeries CY7C637xx
RAMSize 256 x 8
Interface PS/2, USB
NumberofI/O 16
Voltage-Supply 4V ~ 5.5V
OperatingTemperature 0°C ~ 70°C
MountingType Surface Mount
Package/Case 24-SOIC (0.295, 7.50mm Width)

Vue d'ensemble

Description

CY7C63743-SXC is a Cypress USB 2.0 hub controller IC. It implements a USB hub with one upstream port to the host and multiple downstream ports (the CY7C6374x family typically supports up to four). It includes the USB 2.0 transceivers, hub arbitration logic, port power switches with overcurrent protection, and basic hub management features to enable embedded USB hubs with high-speed (480 Mbps) and full-speed operation.
Use cases: adding multiple USB ports to an embedded system, docking stations, peripherals, or automotive/industrial apps where a compact hub is needed.
Operation: usually controlled by a host MCU or embedded processor to configure descriptors, handle control requests, and manage port power; some variants can operate with limited firmware for standalone tasks. See the datasheet for exact pinout, electrical specs, package (SXC) details, and memory/ROM options.

Features

Here are the core features of CY7C63743-SXC (EZ-USB family):
- USB 2.0 Hi-Speed peripheral controller with integrated PHY (480 Mbps) and full-speed compatibility
- On-chip 8051-based microcontroller for firmware and device logic
- On-chip RAM and ROM for firmware/data; supports external memory interface
- DMA engine with endpoint FIFOs for high-throughput USB data transfer
- Flexible endpoint architecture: multiple endpoints (including bulk, interrupt, and isochronous)
- Programmable USB descriptors and device classes via firmware (e.g., HID, MSC, CDC)
- General-purpose I/O pins with configurable directions and drive strength
- Clocking options with USB-required 48 MHz operation (PLL) from a crystal
- Power options: bus-powered or self-powered, with power management and suspend/resume support
- Development ecosystem: Cypress EZ-USB tools, sample firmware, and evaluation/support resources
Note: exact memory size, number of endpoints, and package details vary by variant; verify datasheet for the SXC-specific specs.

Package

CY7C63743-SXC is packaged in a 64‑pin LQFP (Thin Quad Flat Pack). For exact dimensions and pinout, consult the Cypress/Fab datasheet.

Pinout

- Pin count: 28-pin package (SXC variant, SSOP-28 style).
- Function: USB device controller (EZ-USB) with a slave-FIFO interface to an external microcontroller.

Manufacturer

- Manufacturer: Cypress Semiconductor Corporation (Cypress).
- What kind of company: An American semiconductor company that designs and manufactures integrated circuits (memory, microcontrollers/USB controllers, mixed-signal ICs). It became part of Infineon Technologies in 2020.

Application

- USB 2.0 peripheral controller for embedded systems
- USB device implementations (HID, mass storage, audio/video peripherals)
- USB bridge/interface to UART/SPI/I2C
- Instrumentation, data acquisition and test equipment
- Consumer electronics peripherals and development boards

Equivalent

Direct public cross-reference for CY7C63743-SXC isn’t published. For a replacement, contact Cypress for an official cross-reference. Functionally similar devices to explore (USB hub/controllers) include Genesys Logic GL850G/GL852G, Renesas uPD7202x, TI TUSB4xx families. Note: you must match port count, speed (HS/FS), voltage, package, and firmware. Please share intended function, number of ports, speed, packaging, and firmware needs for a concrete substitute.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire