BQ29700DSET

Les images sont à titre de référence seulement

BQ29700DSET

IC BATT PROT LI-ION 1CELL 6WSON

  • Fabricant
  • Mfr. Partie #BQ29700DSET
  • Paquet WSON-6
  • Fiche de données
  • En stock2832

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Function Battery Protection
BatteryChemistry Lithium Ion/Polymer
NumberofCells 1
FaultProtection Over Current, Over/Under Voltage, Short Circuit
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 6-WFDFN

Vue d'ensemble

Description

BQ29700DSET is TI’s protection IC for a single-cell Li‑ion/Li‑polymer pack. It monitors cell voltage, current, and temperature and drives two back-to-back external MOSFETs to protect the cell from faults. If an overcharge, overdischarge, or overcurrent/short is detected, it disconnects the pack and then auto-retries after the fault clears (hiccup mode).
The DSET version adds a DSET pin to program the discharge current limit with an external resistor, allowing you to tailor protection to the specific pack.
Typical applications: 1‑cell battery packs in portable electronics, power tools, and accessories needing safe Li‑ion protection.
Key features: over/under-voltage protection, overcurrent/short‑circuit protection, back-to-back MOSFET control, auto-retry, low quiescent current, and a small package (SOT‑23/6). Often used with an external NTC for temperature sensing and the recommended MOSFET arrangement as per the datasheet.

Features

Key features of the bq29700DSET (1S Li‑ion/Li‑polymer battery protector):
- Protects a single cell with two back‑to‑back external MOSFETs to fully isolate the pack during faults (charge and discharge paths).
- Protection functions: overcharge (OCD), overdischarge (ODP), overcurrent/short‑circuit (OCP/SCP), and overtemperature.
- Uses RSENSE for current measurement and supports a thermistor input for temperature monitoring.
- Independent control of charge and discharge directions with fast OCP/SCP protection and latch behavior.
- Auto‑retry after a fault and fault/Status signaling for host monitoring.
- Low quiescent current for long‑life standby in battery packs.
- Designed for convenient 1S protection with minimal external components.
- Suitable voltage range for a typical 1S Li‑ion cell (roughly in the 2.7–4.3 V region, depending on the exact cell chemistry and setup).
Note: exact voltage thresholds, timing, and pinout should be confirmed in the datasheet for your package variant.

Package

An 8-pin surface-mount package: SOIC (D-package).

Pinout

- Pin count: 8 pins (8-pin package such as SOP-8/UW).
- Function: A Li-Ion/Li-polymer battery protection IC. It monitors cell voltage and current and controls two external MOSFETs to protect against overcharge, overdischarge, overcurrent, and short-circuit conditions. The DSET variant uses the DSET pin to program the discharge current limit via an external resistor.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits (ICs) and related semiconductor products.

Application

Single-cell Li‑ion/Li‑polymer battery protection IC.
Used in protected packs for portable consumer electronics (cell phones, cameras, MP3 players, PDAs, handheld gaming).
Also suitable for USB power banks and compact medical/portable devices.
Provides overcharge, overdischarge, and overcurrent/short‑circuit protection with integrated FETs and status outputs for safe operation.

Equivalent

There’s no published exact cross-reference for BQ29700DSET. It’s TI’s standalone Li-ion protection IC requiring external FETs. Closest TI options are other members of the BQ2970x/BQ29700 family. For third‑party equivalents, consider Seiko Instruments S‑825x/S‑826x series or On Semiconductor NCP safety‑protector ICs, and other 1–2 cell protector devices. Use TI’s Cross Reference tool or distributor databases to locate current equivalents.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire