AT24C04C-XHM-T

Les images sont à titre de référence seulement

AT24C04C-XHM-T

IC EEPROM 4KBIT I2C 1MHZ 8TSSOP

  • Fabricant
  • Mfr. Partie #AT24C04C-XHM-T
  • Paquet 8-TSSOP
  • Fiche de données
  • En stock4120

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat EEPROM
Technology EEPROM
MemorySize 4Kb (512 x 8)
MemoryInterface I²C
ClockFrequency 1 MHz
WriteCycleTime-WordPage 5ms
AccessTime 550 ns
Voltage-Supply 1.7V ~ 5.5V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-TSSOP (0.173, 4.40mm Width)

Vue d'ensemble

Description

The AT24C04C-XHM-T is a 4-kilobit (512 x 8-bit) EEPROM (Electrically Erasable Programmable Read-Only Memory) produced by Microchip Technology. It utilizes the I²C (Inter-Integrated Circuit) protocol for communication, allowing multiple devices to be connected on a single bus. This EEPROM features a wide operating voltage range of 1.8V to 5.5V, making it suitable for various applications, including consumer electronics, automotive, and industrial systems.
Key features include a low-power consumption mode, a fast write time (typically 5 ms), and supports up to 1 million write cycles, ensuring durability. The device also includes an internal page write capability that allows writing up to 16 bytes at once, enhancing efficiency in data storage. Additionally, the AT24C04C-XHM-T is available in various packages, including SOIC and TSSOP, providing flexibility for different designs. This makes it an ideal choice for applications requiring reliable non-volatile memory with low power consumption and easy integration into microcontroller-based systems.

Features

The AT24C04C-XHM-T is a 4K bit (512 x 8) EEPROM (Electrically Erasable Programmable Read-Only Memory) featuring I2C (Inter-Integrated Circuit) communication. Key features include:
1. Memory Density: 4 Kbit of EEPROM storage.
2. I2C Interface: Supports standard (100 kHz) and fast (400 kHz) modes for efficient data transfer.
3. Multiple Devices: Up to 8 devices can be connected on the same I2C bus.
4. Write Cycle Time: Typically 5 milliseconds for EEPROM write operations.
5. Endurance: Supports up to 1 million write/erase cycles per memory cell.
6. Data Retention: Retains data for over 100 years under specified conditions.
7. Low Power Consumption: Operates at a voltage range of 1.7V to 5.5V, making it suitable for battery-operated devices.
8. Packages: Available in various packages, including SOIC and TSSOP.
This makes the AT24C04C-XHM-T ideal for applications requiring non-volatile memory storage, such as configuration settings, calibration data, or system parameters.

Package

The AT24C04C-XHM-T is available in an 8-lead SOIC (Small Outline Integrated Circuit) package type. This package is designed for surface mounting and is commonly used in electronic applications for EEPROM memory storage.

Pinout

The AT24C04C-XHM-T is a 4Kb I2C EEPROM (Electrically Erasable Programmable Read-Only Memory) device. It has a total of 8 pins. The pin definitions are as follows:
1. VCC: Power supply (typically +2.7V to +5.5V)
2. GND: Ground
3. SDA: Serial Data Line (bi-directional I2C data line)
4. SCL: Serial Clock Line (I2C clock line)
5. WP: Write Protect (connected to VCC for normal operation; if tied to GND, write operations are disabled)
6. A0: Address select pin (used to set the least significant bit of the device address)
7. A1: Address select pin (used to set the second least significant bit of the device address)
8. NC: Not Connected (no internal connection)
This device is typically used for non-volatile data storage in various applications.

Manufacturer

The AT24C04C-XHM-T is manufactured by Microchip Technology Inc., a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. Founded in 1989 and based in Chandler, Arizona, Microchip is known for its innovation in embedded control solutions, serving a variety of industries including automotive, industrial, consumer, and communications. The company specializes in providing both hardware and software development tools for engineers, focusing on creating products that enhance system performance and reliability. The AT24C04C-XHM-T is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device, commonly used for data storage in electronic applications.

Application

The AT24C04C-XHM-T is a 4Kb I2C EEPROM used in various applications such as data storage for microcontrollers, digital consumer electronics, automotive systems, and industrial automation. It's ideal for storing configuration settings, calibration data, and user preferences due to its non-volatile memory capability and low power consumption.

Equivalent

The AT24C04C-XHM-T is a 4Kb I2C EEPROM memory chip. Equivalent products include:
1. Microchip 24LC04B
2. STMicroelectronics M24C04
3. NXP (Philips) PCF8584
4. Winbond W25X40CL
Ensure to verify specific electrical characteristics and pin configurations for compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire