AMC3330DWE

Les images sont à titre de référence seulement

AMC3330DWE

IC ISOLATED AMPLIFIER

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Texas Instruments
Package Tube
ProductStatus Active
Type Isolated
Applications Driver
MountingType Surface Mount
Package/Case 16-SOIC (0.295, 7.50mm Width)

Vue d'ensemble

Description

AMC3330DWE is an isolated analog front-end IC used to interface sensors to a microcontroller while providing galvanic isolation. It combines an input signal path, an isolation barrier, and a digital output interface, enabling safe measurement of high-voltage or high-dV/dt signals in harsh environments. Typical applications include motor drives, power supplies, inverters, and industrial sensors for current/voltage sensing and energy metering. Key points: isolation between the sensor and the MCU, a digital output to the host processor, and suitability for high-reliability industrial use. The DWE suffix denotes a specific packaging/lot variant. For exact isolation rating, input range, bandwidth, interface (SPI/I2C), and power-supply requirements, consult the manufacturer’s datasheet and application notes. If you meant a different manufacturer, please specify for a tailored overview.

Features

AMC3330DWE is a single-channel isolated analog signal conditioner for current sensing. Key features:
- galvanic isolation between input and output (high voltage isolation barrier)
- 1-channel isolated analog output (proportional to sensed signal)
- wide common-mode voltage range and high CMRR
- compatible with 3.3 V or 5 V logic on the isolated side
- low input-referred noise and low offset with good drift performance
- built-in protection: undervoltage, overvoltage/open-load/short-circuit handling
- broad operating temperature range for automotive and industrial use
- compact DWE 8-pin package for easy PCB integration
- minimal external components required for basic operation (often no external gain-setting needed)
Note: for exact isolation rating, gain, input range, and electrical characteristics, please refer to the specific datasheet.

Package

I can’t verify live, but the AMC3330DWE suffix typically denotes an 8‑pin DFN/WSON (compact 3×3 mm class) package. Please confirm exact package dimensions and pinout in the manufacturer’s datasheet.

Pinout

The AMC3330DWE is an 8-pin isolated precision amplifier. Its pins provide the two isolated sides (input/high-voltage side and output/low-voltage side) and typical functions are:
- Input side (primary): VIN+ (differential positive), VIN− (differential negative), VDD1 (primary supply), GND1 (primary ground)
- Output side (secondary): VOUT (analog output), VOUT_REF (output reference), VDD2 (secondary supply), GND2 (secondary ground)
In short: 8 pins; purpose — convert a differential high-voltage measurement across an isolation barrier to a low-voltage analog output with reinforced isolation between primary and secondary.

Application

AMC3330DWE is a galvanically isolated, high-precision signal-conditioning IC for high-side current sensing. Its isolation and accuracy suit:
- Motor drives (BLDC/AC) and servo systems
- Power supplies and DC-DC converters
- Three-phase and solar PV inverters
- Energy metering and smart-grid equipment
- Battery management systems and EV charging
- Industrial automation and robotics instrumentation

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire