ADUM7641CRQZ

Les images sont à titre de référence seulement

ADUM7641CRQZ

DGTL ISOLTR 1KV 6CH GP 20-SSOP

  • Fabricant
  • Mfr. Partie #ADUM7641CRQZ
  • Paquet
  • Fiche de données
  • En stock5395

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series iCoupler®
Part Status Active
Base Product Number ADUM7641
Technology Magnetic Coupling
Type General Purpose
Isolated Power No
Number of Channels 6
Inputs - Side 1/Side 2 5/1
Channel Type Unidirectional
Voltage - Isolation 1000Vrms
Common Mode Transient Immunity (Min) 15kV/µs
Data Rate 25Mbps
Propagation Delay tpLH / tpHL (Max) 50ns, 50ns
Pulse Width Distortion (Max) 6ns
Rise / Fall Time (Typ) 2ns, 2ns
Voltage - Supply 3V ~ 5.5V
Operating Temperature -40°C ~ 105°C
Mounting Type Surface Mount
Package 20-SSOP (0.154", 3.90mm Width)
Supplier Device Package 20-QSOP
Packaging Tube

Vue d'ensemble

Description

ADUM7641CRQZ is a four-channel digital isolator from Analog Devices (iCoupler technology). It provides galvanic isolation between two separate sides of a circuit, allowing digital signals to pass across the isolation barrier without a direct electrical connection. Each channel transfers a signal from one side to the other, using separate supply rails on each side (VDD1 and VDD2).
Key points:
- 4 isolated data channels in an 8‑pin package (CRQZ is the RoHS 8‑lead SOIC variant).
- Isolation typically rated around several kilovolts (voltage across barrier) with no optocouplers.
- Compatible with common logic levels; both sides powered independently (typical 3–5.5 V ranges).
- Low power, fast edges, suitable for industrial and automotive environments.
Typical uses: isolating SPI/I2C/UART lines, GPIOs, and other digital signals to protect low-voltage controllers from high-voltage/noisy domains.
Note: consult the datasheet for exact pinout, channel directions, propagation delay, and device ratings.

Features

ADUM7641CRQZ is a four‑channel iCoupler digital isolator. Key features:
- Four independent, unidirectional data channels (isolated between input and output sides)
- Reinforced isolation rating at 5 kV rms (input/output isolation)
- Dual supplies on each side: VDD1 and VDD2 with compatible 3.3/5.0 V operation
- High-speed data capability suitable for SPI/I2C and general digital buses
- Fast propagation with low jitter and low power per channel
- High common‑mode transient immunity and robust ESD protection
- RoHS-compliant, 16‑lead package (CRQZ), available for industrial temperature range (-40°C to +125°C)
Recommended use: isolate microcontroller interfaces from noisy/high-voltage sections, e.g., SPI peripherals and control signals.

Package

The ADUM7641CRQZ comes in a 20‑lead surface‑mount package, specifically a 20‑lead LQFP (5x5 mm) RoHS‑compliant variant.

Pinout

- Pin count: 16 pins (16‑lead package, e.g., SOIC).
- Function: ADUM7641CRQZ is a quad-channel digital isolator (iCoupler). It provides galvanic isolation between the input side (VDD1/VSS1) and the output side (VDD2/VSS2) with four isolated data channels, typically used to isolate interfaces such as SPI/UART.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI).
- What kind of company: A global American semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits (e.g., data converters, op-amps, sensors, power management, and isolation devices like iCoupler).

Application

ADuM7641CRQZ is a digital isolator. Typical application areas include galvanic isolation of microcontrollers/DSPs in noisy/high-voltage environments: industrial automation/control, motor drives and power electronics, energy meters/smart grid, instrumentation and data acquisition, automotive and medical electronics. It enables isolated interfaces (SPI, I2C, UART) and protects low-voltage circuitry from transients.

Equivalent

Possible equivalents (4-channel digital isolators with similar specs to ADuM7641CRQZ):
- Texas Instruments ISO7641 family (e.g., ISO7641, ISO7642)
- Broadcom/Avago HCPL-7840 and HCPL-7841
- NVE IL600/IL700 series digital isolators
All offer similar isolation (about 5 kV rms reinforced), 3.3–5 V operation, and multi-channel isolation. Check pinout and package compatibility for your design.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire