ADUM1400ARW

Les images sont à titre de référence seulement

ADUM1400ARW

DGTL ISOLTR 2.5KV 4CH GP 16-SOIC

  • Fabricant
  • Mfr. Partie #ADUM1400ARW
  • Paquet
  • Fiche de données
  • En stock22309

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series iCoupler®
Part Status Obsolete
Base Product Number ADUM1400
Technology Magnetic Coupling
Type General Purpose
Isolated Power No
Number of Channels 4
Inputs - Side 1/Side 2 4/0
Channel Type Unidirectional
Voltage - Isolation 2500Vrms
Common Mode Transient Immunity (Min) 25kV/µs
Data Rate 1Mbps
Propagation Delay tpLH / tpHL (Max) 100ns, 100ns
Pulse Width Distortion (Max) 40ns
Rise / Fall Time (Typ) 2.5ns, 2.5ns
Voltage - Supply 2.7V ~ 5.5V
Operating Temperature -40°C ~ 105°C
Mounting Type Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOIC
Packaging Tube

Vue d'ensemble

Description

ADuM1400ARW is Analog Devices’ 4-channel digital isolator (iCoupler) used to galvanically isolate SPI-like signals between two domains. It provides four unidirectional channels with separate VDD1 and VDD2 rails, so you can wire it to implement isoSPI: typically two master-to-slave lines (e.g., SCK and MOSI), one slave-to-master line (MISO), and a chip-select or similar line. No optocouplers are needed, offering fast edge rates, reduced power, and protection against ground loops and voltage spikes. The ARW suffix denotes the package/kit option (an 8-pin device with tape-and-reel availability). Common applications include isolating microcontrollers from sensors, ADCs/DACs, motor controllers, and other peripherals in industrial, automotive, or safety-critical systems.

Features

ADuM1400ARW is a 4-channel digital isolator (iCoupler technology) from Analog Devices. Key features:
- Four independent, unidirectional digital isolation channels
- galvanic isolation between input and output domains (no optocouplers)
- Dual supplies: VDD1 and VDD2 allow compatible logic levels on both sides (e.g., 3.3V/5V)
- Isolation rating: typically reinforced isolation (up to a few kV rms per device)
- High-speed data transfer: tens of Mbps range per channel with low propagation delay and low channel-to-channel skew
- Low power consumption
- ESD protection on I/O
- Wide operating temperature options (industrial-grade variants available)
- Practical for isolating SPI, I2C, UART, and other digital interfaces
- Package: ARW (16-pin) standard MSOP/SOIC form factor
Note: exact isolation voltage, speed, and thermal specs vary by variant; refer to the ADuM1400ARW datasheet for precise numbers.

Package

ADuM1400ARW is in a 16‑lead surface‑mount package (16‑pin SOIC), RoHS compliant. The ARW code is the ADI package variant for this device.

Pinout

- Pin count: 16 pins (16‑pin package, ROHS indicated by ARW).
- Function: Four‑channel unidirectional digital isolator (iCoupler). Provides galvanic isolation between input side (DI1–DI4, VDD1/GND1) and output side (DO1–DO4, VDD2/GND2).

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI)
- What kind of company: A US-based multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits, including data converters, amplifiers, sensors, power management, and isolation products.

Application

ADuM1400ARW is a four-channel digital isolator. Typical application areas include:
- Isolated digital interfaces for microcontrollers and peripherals
- Industrial automation (PLCs, sensors, actuators)
- Motor drives and power electronics
- Data acquisition and instrumentation
- Automotive sensor interfaces and battery-management systems
- Medical equipment signal isolation
- Energy meters and smart power supplies

Equivalent

ADuM1400ARW is a 4‑channel iCoupler digital isolator. Equivalents from other vendors include:
- TI ISO784x family (4‑channel digital isolators)
- Silicon Labs Si86xx family (4‑channel digital isolators)
- NVE IL series (4‑channel digital isolators)
Also, other Analog Devices iCoupler parts (e.g., ADuM2400/2401) can serve as cross‑references if packaging/speed differ.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire