ADUM1250SRZ-RL7

Les images sont à titre de référence seulement

ADUM1250SRZ-RL7

DGTL ISOLTR 2.5KV 2CH I2C 8-SOIC

  • Fabricant
  • Mfr. Partie #ADUM1250SRZ-RL7
  • Paquet
  • Fiche de données
  • En stock28176

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Series iCoupler®
Part Status Active
Base Product Number ADUM1250
Technology Magnetic Coupling
Type I2C
Isolated Power No
Number of Channels 2
Inputs - Side 1/Side 2 2/2
Channel Type Bidirectional
Voltage - Isolation 2500Vrms
Common Mode Transient Immunity (Min) 25kV/µs
Data Rate 1Mbps
Pulse Width Distortion (Max) 145ns, 85ns
Voltage - Supply 3V ~ 5.5V
Operating Temperature -40°C ~ 125°C
Mounting Type Surface Mount
Package 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC
Packaging Cut Tape (CT), Tape & Reel (TR)

Vue d'ensemble

Description

ADuM1250SRZ-RL7 is an Analog Devices iCoupler digital isolator that provides galvanic isolation for SPI-like (isoSPI) signals. It is a four‑channel isolator with dual supplies (VDD1 and VDD2) so you can run the two sides of the link from independent grounds. The SRZ‑RMO packaging indicates a 16‑lead RoHS, lead‑free, tape‑and‑reel version (SRZ is the package code; RL7 denotes RoHS/T&R). Typical use is to couple a host MCU to an isolated peripheral (sensors, ADC/DAC, motor drivers, etc.) across an isolation barrier, maintaining signal integrity and protecting devices in noisy or safety‑critical environments. Signals cross the barrier as SPI‑like lines (e.g., MOSI/MISO/SCK/CS) without a common ground. Benefits include noise rejection, ground‑loop elimination, and safer high‑voltage separation while preserving fast data transfer.

Features

ADUM1250SRZ-RL7 features (concise):
- 4-channel digital isolator (iCoupler) with galvanic isolation between input and output sides
- Isolation rating: 5 kV RMS per channel
- Four isolated data channels suitable for standard digital logic levels (TTL/CMOS)
- High-speed, low-power operation; data rate on the order of tens of Mbps per channel with low propagation delay
- Independent supply rails on each side; supports 3.3 V and 5 V logic
- Industrial temperature range (-40°C to +125°C)
- 16-pin SRZ lead-free, RoHS-compliant package; RL7 denotes tape-and-reel option
- Applications: SPI/I2C/SMBus interfaces, isolated sensor/peripheral connections, microcontroller-to-peripheral isolation, etc.

Package

ADUM1250SRZ-RL7 is a 16‑lead SOIC (surface-mount, gull-wing) package on a 7‑inch tape‑and‑reel (RL7).

Pinout

- Pin count: 16 pins (SOIC-16, SRZ)
- Function: 4-channel digital isolator (iCoupler) with galvanic isolation between input side (VDD1/GND1) and output side (VDD2/GND2); four unidirectional data channels (A1–A4 to B1–B4). RL7 indicates Tape & Reel packaging.

Manufacturer

Manufacturer: Analog Devices, Inc. (ADI).
Company type: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits (e.g., data converters, amplifiers, sensors, MEMS, power management) for automotive, industrial, communications, consumer, and other markets.

Application

Applications for ADUM1250SRZ-RL7 include:
- Isolated SPI interface between MCU and isolated peripherals (ADC/DAC, sensors, memory, SPI devices)
- Industrial control and automation (PLC I/O, motor drives, power supplies)
- Automotive electronics (isolated sensors/ECU subsystems, high-voltage isolation)
- Data acquisition/instrumentation requiring galvanic isolation
- Systems requiring protection from high-voltage transients and ground-loop noise in harsh environments

Equivalent

Equivalent parts (4‑channel SPI digital isolators) include:
- Analog Devices: ADuM1250, ADuM1251, ADuM1252 (same family, different directions)
- TI: ISO1540/ISO1541/ISO7840/ISO7841 isoSPI isolators
- Silicon Labs: Si86xx isoSPI digital isolators
- Broadcom/Avago: HCPL-7800/7840 family (4‑channel digital isolators)
Note: exact pinout and channel directions vary—verify package, voltage rails, and directionality for a drop‑in replacement.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire