AD5263BRUZ200

Les images sont à titre de référence seulement

AD5263BRUZ200

IC DGT POT 200KOHM 256TP 24TSSOP

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Supplier Rochester Electronics, LLC,Analog Devices Inc.
Package Bulk,Tube
ProductStatus Active
Taper Linear
Configuration Potentiometer
NumberofCircuits 4
NumberofTaps 256
Resistance(Ohms) 200k
Interface I²C, SPI
MemoryType Volatile
Voltage-Supply 4.5V ~ 16.5V, ±4.5V ~ 7.5V
Features Cascade Pin, Selectable Address
Tolerance ±30%
TemperatureCoefficient(Typ) 30ppm/°C
MountingType Surface Mount
SupplierDevicePackage 24-TSSOP
Package/Case 24-TSSOP (0.173, 4.40mm Width)
OperatingTemperature -40°C ~ 125°C

Vue d'ensemble

Description

AD5263BRUZ200 is an Analog Devices digitally controlled potentiometer (digipot). It provides a programmable resistance path between its terminals A and B via a serial interface, allowing software to set the wiper position for adjustable gain, attenuation, calibration, or offset in analog circuits. The BRUZ200 suffix indicates the specific RoHS-compliant package variant (the exact package/reel details are in the datasheet). While behavior and electrical specs depend on the end-to-end resistance option (e.g., 10 kΩ, 50 kΩ, 100 kΩ) and whether the wiper is volatile or nonvolatile, typical uses include fine-tuning analog signal paths and sensor interfaces. For precise values—end-to-end resistance, resolution, interface protocol, voltage range, power consumption, and memory type—consult the official AD5263 datasheet and product page.

Features

AD5263BRUZ200 is a digital potentiometer from Analog Devices. Key features (typical, exact numbers depend on the variant; verify the datasheet for your exact part):
- SPI-compatible digital interface (CS, SCLK, DIN/SDI, DOUT) for wiper control
- End-to-end resistance options across variants (e.g., 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ typical)
- Wiper resolution (digital steps) with a wiper position register
- 2.7 V to 5.5 V operation (rail-to-rail I/O on many pins)
- Low power consumption; suitable for battery-powered and portable designs
- 8-lead package (BRUZ suffix indicates specific package/temperature range)
- Wide operating temperature range (commonly -40°C to +125°C)
- RoHS compliant and Pb-free
Common applications: gain/attenuation control, programmable offsets, sensor signal conditioning, and adjustable reference/dividers.
Note: For exact end-to-end resistance, wiper resolution, current drive capability, and nonvolatile vs. volatile behavior, refer to the specific datasheet for AD5263BRUZ200.

Package

8‑lead MSOP (MSOP‑8) package, RoHS compliant (lead‑free).

Pinout

- Pin count: 8 pins (MSOP-8/SOIC-8 package).
- Function: Digital potentiometer (A–B–W terminals) with a serial control interface (SPI-compatible) to set the wiper position. VDD/VSS are provided; W is the adjustable wiper output for use in analog circuits.

Manufacturer

- Manufacturer: Analog Devices, Inc. (Analog Devices)
- Company type: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing (DSP) integrated circuits.

Application

AD5263BRUZ200 is a dual digital potentiometer used for precision resistance adjustment in analog signal paths. Common applications:
- Programmable gain/attenuation and feedback in op-amp/instrumentation amplifiers
- Programmable attenuators for audio or measurement chains
- Sensor biasing and offset/gain calibration for ADC/DAC front-ends
- Calibration/trim in instrumentation and test equipment
- Remote/automatic adjustment of analog parameters in control systems and data acquisition

Equivalent

Equivalents depend on exact specs. For a dual I2C digital potentiometer like the AD5263BRUZ200, typical cross-references include:
- Analog Devices: AD5252, AD5253 (dual I2C D-pots)
- Microchip: MCP41/42/45 series (SPI/I2C variants)
Exact substitution requires end-to-end resistance (Rab), supply voltage, interface, and package. Please provide Rab (e.g., 10k/50k/100k), Vdd range, desired interface (I2C/SPI), and package to give precise equivalents.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire