93AA56AT-I/OT

Les images sont à titre de référence seulement

93AA56AT-I/OT

IC EEPROM 2KBIT MIC WIRE SOT23-6

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
DigiKey Programmable Verified
Memory Type Non-Volatile
Memory Format EEPROM
Technology EEPROM
Memory Size 2Kbit
Memory Organization 256 x 8
Memory Interface Microwire
Write Cycle Time - Word, Page 6ms
Voltage - Supply 1.8V ~ 5.5V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case SOT-23-6
Supplier Device Package SOT-23-6
Base Product Number 93AA56
Clock Frequency 2 MHz

Vue d'ensemble

Description

The 93AA56AT-I/OT is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device produced by Microchip Technology. It features a 1-kbit memory capacity organized into 128 bytes, with each byte being individually addressable. This EEPROM operates over a supply voltage range of 1.8V to 5.5V and communicates using a 2-wire I²C interface, making it compatible with various microcontrollers and digital systems.
The "I" in the part number indicates an industrial temperature range, typically from -40°C to +85°C, while "OT" refers to the operational temperature range. This device is particularly useful for applications requiring non-volatile memory storage, such as configuration settings, calibration data, and small data logging.
Key features include low power consumption, high endurance (up to 1 million write cycles), and data retention of over 100 years, making it suitable for battery-operated devices and long-term data storage applications.

Package

The 93AA56AT-I/OT is offered in an 8-lead TDFN (Thin Dual Flat No-lead) package. This compact package type is designed for space-constrained applications, providing a low-profile solution for memory devices.

Pinout

The 93AA56AT-I/OT is a 8-pin serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device. Its pin count is 8, and the functions of each pin are as follows:
1. VCC (Pin 1): Power supply pin.
2. VSS (Pin 2): Ground reference pin.
3. SDA (Pin 3): Serial Data Input/Output; used for data transfer.
4. SCL (Pin 4): Serial Clock; synchronizes data transfer.
5. WP (Pin 5): Write Protect; used to enable or disable writing to the memory.
6. A0 (Pin 6): Address pin; used to select the device in a multi-device configuration.
7. A1 (Pin 7): Address pin; used to further select the device in a multi-device setup.
8. NC (Pin 8): No Connection; not internally connected.
This device operates using a two-wire interface and is typically used for storing small amounts of data in applications such as sensors and identification systems.

Manufacturer

The manufacturer of the 93AA56AT-I/OT is Microchip Technology Inc. Microchip is a leading provider of microcontroller and analog semiconductors. Founded in 1989, the company specializes in developing embedded control solutions, including microcontrollers, digital signal controllers, and various memory products. Microchip's offerings cater to a wide range of industries, including automotive, industrial, consumer, and communications, emphasizing innovation and reliability in embedded systems. The 93AA56AT-I/OT is a serial EEPROM device used for non-volatile data storage in various applications.

Application

The 93AA56AT-I/OT is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) primarily used in applications such as digital memory for microcontrollers, data storage in consumer electronics, automotive systems, and industrial equipment. Its compact size and low power consumption make it ideal for applications requiring non-volatile data storage, like configuration settings, calibration data, or user preferences in devices like smart meters, medical devices, and wearable technology.

Equivalent

The 93AA56AT-I/OT chip is an EEPROM from Microchip Technology. Equivalent products include the 93AA56A, 93C56A, and other similar EEPROMs from Microchip or competitors like STMicroelectronics and NXP, as long as they share similar specifications such as memory size, voltage, and interface. Always check datasheets for compatibility.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire