25LC010AT-I/OT

The 25LC010AT-I/OT is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device from Microchip Technology. It features a 1 Mbit (128 KB) memory capacity, organized as 128 pages of 8 bytes each. This EEPROM communicates via a Serial Peripheral Interface (SPI), allowing for high-speed data transfer. The operating voltage range is typically between 2.5V and 5.5V, making it suitable for various applications in low-power environments.
Key features include fast access time, a 2 MHz clock frequency, and the ability to perform byte, page, and chip erase operations. The device is ideal for storing configuration data, calibration settings, and other non-volatile information in consumer electronics, automotive systems, and industrial applications. Its compact 8-pin SOIC or DIP package makes it easy to integrate into various circuit designs.
The 25LC010AT-I/OT is known for its reliability, endurance, and relatively low power consumption, making it an excellent choice for applications requiring persistent data storage.

The 25LC010AT-I/OT is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. Key features include:
- Memory Size: 1 Mbit (128 KB) of EEPROM storage.
- Interface: SPI (Serial Peripheral Interface) compatible, allowing easy integration with microcontrollers.
- Voltage Range: Operates typically between 2.5V to 5.5V, suitable for various electronic devices.
- Speed: Fast read access time of up to 5 MHz.
- Data Retention: Retains data for up to 100 years under proper conditions.
- Write Endurance: Supports up to 1 million write/erase cycles.
- Page Write Capability: Can write data in pages of 16 bytes, enhancing efficiency.
- Low Power Consumption: Ideal for battery-operated devices due to its low power usage in active and standby modes.
- Package Options: Available in various packages, including SOIC, TSSOP, and DFN.
These features make the 25LC010AT-I/OT suitable for applications like data logging, configuration storage, and other non-volatile memory requirements.

The 25LC010AT-I/OT is typically available in an 8-pin SOIC (Small Outline Integrated Circuit) package type. It may also be found in a TSSOP (Thin Shrink Small Outline Package) form factor. This EEPROM is used for various applications requiring non-volatile memory.

The 25LC010AT-I/OT is a 1 Mbit serial EEPROM from Microchip Technology. It features an 8-pin configuration, with the following pin assignments:
1. CS (Chip Select): Activates the device for communication.
2. MOSI (Master Out Slave In): Serial data input for data to be written to the memory.
3. MISO (Master In Slave Out): Serial data output for data read from the memory.
4. SCK (Serial Clock): Clock signal for synchronizing data transfer.
5. WP (Write Protect): Enables write protection when tied to VCC.
6. VSS (Ground): Connects to the ground of the circuit.
7. VCC (Power Supply): Power supply pin, typically +2.5V to +5.5V.
8. NC (No Connect): Not used, should be left unconnected.
This device supports SPI (Serial Peripheral Interface) communication, allowing for efficient data storage and retrieval in embedded systems.

The manufacturer of the 25LC010AT-I/OT is Microchip Technology Inc. Microchip is a global semiconductor company that specializes in developing microcontrollers, memory products, and analog semiconductors. Established in 1989 and headquartered in Chandler, Arizona, Microchip serves a wide range of industries, including automotive, industrial, consumer, and communications. The company is known for its extensive portfolio of integrated circuits and development tools, which support various applications in embedded systems. Microchip is recognized for its focus on innovation and customer support, providing solutions that enhance product design and performance.

The 25LC010AT-I/OT is a 1 Mbit serial EEPROM with applications in various areas including consumer electronics (e.g., TVs, audio systems), automotive systems (e.g., dashboard displays), industrial automation (e.g., control systems), and telecommunications (e.g., routers and switches). It is used for data storage, configuration settings, firmware storage, and calibration data in embedded systems requiring non-volatile memory.

The 25LC010AT-I/OT is a 1 Mbit SPI EEPROM. Equivalent products include:
1. Macronix MX25L010
2. Winbond W25X10
3. Atmel AT25DF010
4. Microchip 25LC010
These alternatives may have slight variations in specifications, so it's important to check the datasheets for compatibility.