24LC1026-I/SN

Les images sont à titre de référence seulement

24LC1026-I/SN

IC EEPROM 1MBIT I2C 400KHZ 8SOIC

100% original & Nouveau

24 heures prêtes à expédier

Garantie 365 jours

RFQ et Obtenez plus de rabais

Spécifications

Part Status Active
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format EEPROM
Technology EEPROM
Memory Size 1Mbit
Memory Organization 128K x 8
Memory Interface I2C
Clock Frequency 400 kHz
Write Cycle Time - Word, Page 5ms
Access Time 900 ns
Voltage - Supply 2.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOIC
Base Product Number 24LC1026

Vue d'ensemble

Description

The 24LC1026-I/SN is a 1024 Kbit (128 Kbyte) EEPROM (Electrically Erasable Programmable Read-Only Memory) device manufactured by Microchip Technology. It utilizes a two-wire I2C interface, allowing for easy communication with microcontrollers and other digital devices. The "I" designation indicates it operates over a wide voltage range, typically from 1.8V to 5.5V, making it suitable for low-power applications.
Key features include a high-speed mode with a clock rate up to 1 MHz, which enhances data transfer rates. The 24LC1026 supports multiple device addressing, permitting up to eight devices on a single I2C bus. It has a built-in page write capability, facilitating writing up to 32 bytes at once.
This EEPROM is ideal for applications requiring non-volatile storage, such as data logging, configuration storage, and calibration data in consumer electronics, automotive systems, and industrial devices. Its compact 8-pin PDIP or 8-pin SOIC package allows for easy integration into various circuit designs.

Package

The 24LC1026-I/SN is available in an 8-pin MSOP (Mini Small Outline Package) or an 8-pin PDIP (Plastic Dual In-line Package). These compact packages are designed for surface mount and through-hole applications, respectively.

Pinout

The 24LC1026-I/SN is a 256 Kbit I²C EEPROM from Microchip Technology. It features a 8-pin Dual In-line Package (DIP) configuration.
The pin count and functions are as follows:
1. VCC: Power supply pin.
2. GND: Ground pin.
3. SDA: Serial Data Line, used for data transmission.
4. SCL: Serial Clock Line, used for clock signaling.
5. WP: Write Protect pin, controls write protection for the entire memory.
6. A0, A1, A2: Address pins, used to configure the device's I²C address for multiple devices on the same bus.
This device operates in a range of 1.8V to 5.5V and supports byte and page write operations, making it suitable for various memory applications.

Manufacturer

The manufacturer of the 24LC1026-I/SN is Microchip Technology Inc. Microchip is a leading provider of microcontroller and analog semiconductors. Founded in 1989, the company specializes in developing microcontrollers, memory, and other integrated circuits designed for a wide range of applications in various industries, including automotive, consumer electronics, industrial, and telecommunications. Microchip is known for its focus on embedded control applications and offers a broad portfolio of products, including EEPROMs like the 24LC1026-I/SN, which is a 1-Mbit I2C-compatible EEPROM. The company's commitment to innovation and customer service has made it a prominent player in the semiconductor industry.

Application

The 24LC1026-I/SN is a 1-Mbit I2C EEPROM used in various applications including data storage for microcontrollers, configuration settings for electronic devices, inventory management systems, and consumer electronics. It is ideal for applications requiring non-volatile memory to retain data during power loss, such as in automotive systems, industrial controls, and smart appliances. Its low power consumption makes it suitable for battery-operated devices as well.

Equivalent

The 24LC1026-I/SN is an I2C EEPROM with 128K bits (16KB) of memory. Equivalent products include the AT24C1024, M24C1024, and CAT24C1024. Ensure compatibility in terms of voltage, pin configuration, and I2C communication for application-specific needs. Always verify datasheets for precise specifications.

Expédition

Méthodes d'expéditionNous

offrir des services d'expédition mondiaux par DHL, FedEx, TNT, UPS ou tout autre expéditeur de votre choix.


Référence des frais d'expédition (DHL/FedEx):

DHL: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 2 à 5 jours ouvrables.

FedEx: Les frais d'expédition varient de 25 à 40 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

UPS: Les frais d'expédition vont de 25 à 45 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

TNT: Les frais d'expédition varient de 25 à 65 $ (0,5 kg), avec un délai de livraison estimé de 3 à 7 jours ouvrables.

EMS: Les frais d'expédition varient de 30 à 50 $ (0,5 kg), avec un délai de livraison estimé de 7 à 15 jours ouvrables.

Courrier aérien enregistré: Le coût d'expédition est de 2 à 4 $ (0,1 kg), avec un délai de livraison estimé de 5 à 20 jours ouvrables.

Paiements

Payment Methods

Le terme de paiement est 100% prépayé.

Actuellement, nous n'acceptons que les méthodes de paiement ci-dessous:

1. PayPal

2. Carte de crédit/débit

3. Transfert bancaire

Similaire